Version: 2.4.3

Simulate AWS Faults

This document describes how to use Chaos Mesh to simulate AWS faults.

AWSChaos introduction

AWSChaos can help you simulate fault scenarios on the specified AWS instance. Currently, AWSChaos supports the following fault types:

EC2 Stop: stops the specified EC2 instance.
EC2 Restart: restarts the specified EC2 instance.
Detach Volume: uninstalls the storage volume from the specified EC2 instance.

`Secret` file

To easily connect to the AWS cluster, you can create a Kubernetes Secret file to store the authentication information in advance.

A Secret file sample is as follows:

apiVersion: v1
kind: Secret
metadata:
  name: cloud-key-secret
  namespace: chaos-mesh
type: Opaque
stringData:
  aws_access_key_id: your-aws-access-key-id
  aws_secret_access_key: your-aws-secret-access-key

name means the Kubernetes Secret object.
namespace means the namespace of the Kubernetes Secret object.
aws_access_key_id stores the ID of the access key to the AWS cluster.
aws_secret_access_key stores the secrete access key to the AWS cluster.

Create experiments using Chaos Dashboard

note

Before you create an experiment using Chaos Dashboard, make sure the following requirements are met:

Chaos Dashboard is installed.
Chaos Dashboard can be accessed via kubectl port-forward:
```
 kubectl port-forward -n chaos-mesh svc/chaos-dashboard 2333:2333
```
Then you can access the dashboard via http://localhost:2333 in your browser.

Open Chaos Dashboard, and click NEW EXPERIMENT on the page to create a new experiment:
In the Choose a Target area, choose AWS FAULT and select a specific behavior, such as STOP EC2.
Fill out the experiment information, and specify the experiment scope and the scheduled experiment duration.
Submit the experiment information.

Create experiments using the YAML file

An `ec2-stop` configuration example

Write the experiment configuration to the awschaos-ec2-stop.yaml file, as shown below:
```
apiVersion: chaos-mesh.org/v1alpha1
kind: AWSChaos
metadata:
  name: ec2-stop-example
  namespace: chaos-mesh
spec:
  action: ec2-stop
  secretName: 'cloud-key-secret'
  awsRegion: 'us-east-2'
  ec2Instance: 'your-ec2-instance-id'
  duration: '5m'
```
Based on this configuration example, Chaos Mesh will inject the ec2-stop fault into the specified EC2 instance so that the EC2 instance will be unavailable in 5 minutes.

For more information about stopping EC2 instances, refer to AWS documentation - Stop and start your instance.
After the configuration file is prepared, use kubectl to create an experiment:
```
kubectl apply -f awschaos-ec2-stop.yaml
```

An `ec2-start` configuration example

Write the experiment configuration to the awchaos-ec2-restot.yaml file:
```
apiVersion: chaos-mesh.org/v1alpha1
kind: AWSChaos
metadata:
  name: ec2-restart-example
  namespace: chaos-mesh
spec:
  action: ec2-restart
  secretName: 'cloud-key-secret'
  awsRegion: 'us-east-2'
  ec2Instance: 'your-ec2-instance-id'
```
Based on this configuration example, Chaos Mesh will inject ec2-restart fault into the specified EC2 instance so that the EC2 instance will be restarted.

For more information about restarting the EC2 instance, refer to the AWS documentation - Reboot your instance.
After the configuration file is prepared, use kubectl to create an experiment:
```
kubectl apply -f awschaos-ec2-restart.yaml
```

A `detach-volume` configuration example

Write the experiment configuration to the awschaos-detach-volume.yaml file:
```
apiVersion: chaos-mesh.org/v1alpha1
kind: AWSChaos
metadata:
  name: ec2-detach-volume-example
  namespace: chaos-mesh
spec:
  action: ec2-stop
  secretName: 'cloud-key-secret'
  awsRegion: 'us-east-2'
  ec2Instance: 'your-ec2-instance-id'
  volumeID: 'your-volume-id'
  deviceName: '/dev/sdf'
  duration: '5m'
```
Based on this configuration example, Chaos Mesh will inject a detail-volume fault into the specified EC2 instance so that the EC2 instance is detached from the specified storage volume within 5 minutes.

For more information about detaching Amazon EBS volumes, refer to the AWS documentation - Detach an Amazon EBS volume from a Linux instance.
After the configuration file is prepared, use kubectl to create an experiment:
```
kubectl apply -f awschaos-detach-volume.yaml
```

Field description

The following table shows the fields in the YAML configuration file.

Parameter	Type	Description	Default value	Required	Example
action	string	Indicates the specific type of faults. Only ec2-stop, ec2-restore, and detain-volume are supported.	ec2-stop	Yes	ec2-stop
mode	string	Specifies the mode of the experiment. The mode options include `one` (selecting a random Pod), `all` (selecting all eligible Pods), `fixed` (selecting a specified number of eligible Pods), `fixed-percent` (selecting a specified percentage of Pods from the eligible Pods), and `random-max-percent` (selecting the maximum percentage of Pods from the eligible Pods).	None	Yes	`one`
value	string	Provides parameters for the `mode` configuration, depending on `mode`.For example, when `mode` is set to `fixed-percent`, `value` specifies the percentage of Pods.	None	No	1
secretName	string	Specifies the name of the Kubernetes Secret that stores the AWS authentication information.	None	No	cloud-key-secret
awsRegion	string	Specifies the AWS region.	None	Yes	us-east-2
ec2Instance	string	Specifies the ID of the EC2 instance.	None	Yes	your-ec2-instance-id
volumeID	string	This is a required field when the `action` is `detach-volume`. This field specifies the EBS volume ID.	None	No	your-volume-id
deviceName	string	This is a required field when the `action` is `detach-volume`. This field specifies the machine name.	None	No	/dev/sdf
duration	string	Specifies the duration of the experiment.	None	Yes	30s

AWSChaos introduction​

Secret file​

Create experiments using Chaos Dashboard​

Create experiments using the YAML file​

An ec2-stop configuration example​

An ec2-start configuration example​

A detach-volume configuration example​

Field description​